Hi,

I have seen in the TDS GTNXi Pro documentation that I can send K events to trigger certain functions of the GTN750, for example to increment or decrement the page knob. How can I trigger a page shortcut button per K event? (I know how to send K events, just not the correct code to use here)

Especially I would like to open the checklist page. I have the GTN 750 installed in the Learjet 35A.

Thank you

Hi, was flying with the BlackSquare King Air tonight and the gtnxi just went black mid-flight. I think I was adjusting the primary CRS knob at that time if it makes any difference.
I tried restarting the external TDS app, no change. Obviously lost COM1, NAV1 and GNSS so that at least was an adventure on vatsim

After completing the flight I selected "Restart Flight" and tried if the unit would come back alive but still nothing. Known issue?

Good day,

After the Navigraph update it appears that I am missing approaches from certain airports. All of the approaches seem to have one thing in common - they include RF legs within the approach. I have tried to re-install the Garmin trainer as well as the TDS software.

Examples are but not limited to:
KCRP - RNAV(RNP)-Z Runway 31
KABQ - RNAV(RNP)-Z Runway 03
KLAS - RNAV(RNP)- Runway 26L
KJAC - RNAV(RNP)-X Runway 19
KJAC - RNAV(RNP)-Y Runway 19

Example screen shot of missing at KCRP can be viewed here

Hi all,

Installed the app today, and installation went well, including Navigraph integration.

Next, I started the A2A Comanche, and switched to VR. From the EFB I selected the 750GTNXi. But all I saw was a black screen. 

After going back to 2D mode, I saw that the GTNXi had initialized and it was responsive. I navigated to the main screen and switched back into VR. Now I could see the main screen, but the unit was unresponsive, no reaction to mouse clicks. 

I returned to 2D mode, and sure enough, the GTNXi was working again.

So I have a unit that works in 2D mode, but not in VR. Since I exclusively fly VR, this is a problem.

Is there a solution?
Thanks in advance!

Hans

Hello,

Recently upgraded my PC. Windows 11 Professional, relatively high-end desktop PC. I have noticed that every time I close the MSFS 2020 (Steam version), the Windows Reliability Monitor reports that "GTN Xi Series Trainer" Stopped working. This is shown on the reliability graph as a red "X" and the graph drops.

There is no obvious sign that the program has crashed, other than my checking the Reliability Monitor. Appears to happen every time I exit the sim.

Please can I get ideas on what to look for to stop the program crashing in the background on sim shutdown? I realize it may be a minor issue, but I don't like looking at the Reliability Monitor graph and seeing this tracking in the mud, plus it should not be happening regardless.

Error report from Reliability Monitor:

Description
Faulting Application Path: C:\ProgramData\Garmin\Trainers\GTI\Production\GTI__GTN_Xi__20_30\app-20.30.8\bin\GTN_Simulator.exe

Problem signature
Problem Event Name: APPCRASH
Application Name: GTN_Simulator.exe
Application Version: 20.30.8.0
Application Timestamp: 63cf046c
Fault Module Name: d3d11.dll_unloaded
Fault Module Version: 10.0.22621.3235
Fault Module Timestamp: e4eafd04
Exception Code: c00001a5
Exception Offset: 00072ea0
OS Version: 10.0.22631.2.0.0.256.48
Locale ID: 2057
Additional Information 1: 0000
Additional Information 2: 00000000000000000000000000000000
Additional Information 3: 0000
Additional Information 4: 00000000000000000000000000000000

Extra information about the problem
Bucket ID: 19c7aa77809c017ce3ac352f13b9d5d8 (1417566459025544664)

All ideas welcome!

Thanks!

salut ,
j'avais pas utilisé Flight simulator2020 depuis un petit moment, j'ai mis a jour le GPS GTNXI
pour mon avion le chancelor 414 ...
le probleme c'est que maintenant,l'ecran du GPS ne s'allume pas !!
j'ai tenté plusieurs ré-installation , sans succes !
les boutons du gps semblent réagir , mais l'ecran reste desesperement noir !

autre chose etrange , si je compare la version affiché par l'installateur et le fichier Json généré , les versions ne sembles pas correspondre !

------------Translate -----------

hi ,
i haven't used Flight simulator2020 for a while, i updated the GTNXI GPS
for my chancelor 414 ...
the problem is that now, the screen of the GPS does not light!
I have tried several re-installations, without success!
the gps buttons seem to react, but the screen remains hopelessly black!

Another strange thing, if I compare the version displayed by the installer and the Json file generated, the versions do not seem to correspond!


here's what I see on the plane:


and here's the strange thing about the json:



in any case, at home, the GPS no longer works!

on start-up, a first whistling sound, then a red LED, a second whistling sound, then nothing.



ps: Flight Simulator is available version : 1.36.2.0  (Steam )

While using the 750 with my flight plan running there is always a green arrow line that points to the closest airport while I'm in flight, is there anyway to turn that off?

I have recently purchased a new pc and I am currently moving/installing all my MSFS files from the old pc.

I had forgotten my original TDS password so I obtained a new one.

Now when I successfully log on to TDS and try to install the GTnxi it tells me that either my log in name or password is incorrect.

Can you please help?

Thank you.

Just bought your GTNXi software and downloaded TDSGPSManager.exe....and it won't run...normally or as administrator.

Have tried disabling Norton and no difference.

Not had this problem before.

Hi, Hope you can help me.

I have recently started using a quest 3 to fly in VR, however in a few aircraft. THe A2a Comanchie and the Flightsimware Learjet I cannot click on the screen of the 750.

Any ideas?

Jeff