Hi,
 I'm experiencing excessive frame dropping and stuttering after the latest MSFS and 1.1.0.2 updates (mostly every 3-4 secs).
 I removed all the Community contents and when I'm only reinstalling TDS GTNXi and enabling it (in a Piper PA=24=250 Comanche) I see this happening.
 With the Garmin GPS I see no issues.
 Where can I install the previous TDS GTNXi version?

Please reset activations

Now that SU15 has landed, I have been able to test the new G3X and the TDS GTN together in the RV14.

Clearly, they do not like each other..  The GTN shows up, but I cannot click the Continue button without the GTN starting to blink and flip between the startup screen and the next screen..

Is there testing being done with this new avionics set?

Update: Like the previous poster, I can get by the startup screen if I start the GTN outside the sim first... However, the G3X does not show the GTN flightplan info.

I have not been using the GTN for a long while. I have the Pro version with Navigraph support. Loaded up Black Square King Air today and the GTN is stuck on the initial screen with my name and Continue button. The screen seems unresponsive and unclickable.

Any ideas on what might be the problem? I have checked in the Manager app that both the trainer and sim unit are on latest build.

Thanks

When I load planes like C310 or the Comanche 250, the frame rate is around 100. After launching TDS GTNXi Pro, the frame rate of the flight simulator gets locked at 30.

I turn off the avionics master switch, the frame rate returns to 100.TDS GTNXi Flight Sim Interface is still running. Then I turn the avionics master switch back on, the flight simulator's frame rate drops back to 30.

I have already tried reinstalling TDS GTNXi Pro and the flight simulator, but it didn't work.

Feel like an idiot, bit is there no NAV button on the GTN650Xi

I have tried everything I can think off.

Using the new Dukes if that makes a difference. Doubt it.

Thanks

Ron

I get the message "Could not find GTNxi PC Trainer. It looks like it is not installed, please reinstall from the TDS GPS Manager or contact support" like you really can contact support directly. I have followed the directions and reinstalled several times. I keep getting the same message. What's the best way to uninstall before reinstalling? Thanks, I'd like for this to work. The Pro upgrade is installed but Flight Simulator is not running.

The Black Square (JustFlight) Dukes (Piston and Turbine) have been released for MSFS and feature the TDS GTNXi for both the GTN750Xi and GTN650Xi in the Virtual Cockpit!

The Dukes are the most technically advanced aircraft simulations for MSFS, with an advanced reciprocating engine simulation, over 120 possible failures and the most advanced turbocharger, pressurization and cabin temperature simulations in MSFS.

The TDS GTNXi Pro transforms the Black Square (JustFlight) Dukes (Piston and Turbine) by adding the modern GPS navigator feel to the very complex and immersive aircraft created for MSFS.

Do not miss out the TDS GTNXi Pro, which offers a fully updateable Navigation Database from Navigraph as well as worldwide Navigraph Charts!

More information and to purchase the Dukes can be found here:

Black Square (JustFlight) Piston Duke:
https://www.justflight.com/product/black...iston-duke

Black Square (JustFlight) Turbine Duke:
https://www.justflight.com/product/black...rbine-duke

The Dukes can be purchased as a bundle at the link below:
https://www.justflight.com/product/black...uke-bundle

The TDS GTNXi Pro for MSFS can be purchased from the TDS Sim Software website:
https://tdssim.com/

Hello,

     I have a question on flight plans.  I have a flight plan loaded and activated using the GTN750xi.  Can I also load this same flight Plan onto the GTN650?  Both displaying information from the same flight plan.  Any help is appreciated.

Thank You,
Kevin W. Ray

Attached Files

Thumbnail(s)
   

Hi guys,

Got the TDS 750 since yesterday as a replacement test for the PMS. In the C414 everything was fine, but in the C310 i only have 2 white screens. What I tried so far:

• Deleted and reinstalled Blackbird/Milviz C310
  
• Deleted and reinstalled Garmin Trainer and TDS Flightsim Software 2 times
  
• Made every EXE run as admin
  
• Turned of Windows Defender
  

Attached Files

Thumbnail(s)