Posts: 1,820
Threads: 40
Joined: May 2017
Reputation:
6
Hello,
Does this bug occur only with the Just Flight Pipers? Are you able to test using another add-on aircraft and let us know if you experience the problem wit it? This would help us know where we can direct the problem to (us or Just Flight).
Thank you.
Posts: 9
Threads: 2
Joined: May 2022
Reputation:
0
05-12-2022, 03:06 PM
(This post was last modified: 05-12-2022, 04:35 PM by JazzBird.)
The insidious thing about this mistake is:
If you start with one of the Arrows from JustFlight the first time, the "TDS GTNXi" is not yet active and the ATC works normally after you have activated the TDS.
On the second flight, however, the "TDS GTNXi" is already activated and the ATC does not work! Only when you click once through the round on the tablet does the ATC work again.
I use the TDS GTNXi also with the Caronado 337, but there I have to activate the "750" every time anyway, so there is no problem.
Posts: 1,820
Threads: 40
Joined: May 2017
Reputation:
6
We understand. Our question is if you have another MSFS add-on aircraft that has the TDS GTNXi integration and you can test under a similar scenario?
Posts: 9
Threads: 2
Joined: May 2022
Reputation:
0
05-12-2022, 06:27 PM
(This post was last modified: 05-12-2022, 06:30 PM by JazzBird.)
No, currently not only the 337 Skymaster from this side -.
V2 of the C337 integration mod
Posts: 9
Threads: 2
Joined: May 2022
Reputation:
0
Today I saw the MilViz 310R in the marketplace and bought it. There have been no problems with ATC here so far after 4 short flights.
Posts: 9
Threads: 2
Joined: May 2022
Reputation:
0
Are there any ideas what could be the problem here? As I said, when I click through all the navigation devices in the cockpit on the tablet, the ATC works. Unfortunately, it still doesn't work when the TDS GTNXi is already set on the tablet.
Is there no one else who has the same problem?
Posts: 1,820
Threads: 40
Joined: May 2017
Reputation:
6
Hello,
We will test this problem ourselves and get back to you, but we are also interested if other users experience the same issue.
Posts: 1,820
Threads: 40
Joined: May 2017
Reputation:
6
We just tested defaulting to the TDS GTNXi inside the JF Piper and set an ATIS frequency, we are able to hear it just fine. Can you confirm that this is the case?
Additionally, what would help us is to please provide us with the start airport.runway and COM frequencies being set in the GTNXi.
Thank you.
