This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
TDS GTNXi VC Integration Installation of G1000 MFD replacement mods
#1
Hello,

Items to check for a G1000 MFD Integration Mod:

Important Note: TDS GTNXi version 1.0.1.1 or higher must be installed for this mod to work!

1) The presence of the TDS GTNXi integration files in the MSFS Community folder.

The first step is to navigate to the community folder and to confirm the presence of the integration folder, named tds-gtnxi-gauge as shown in the image below:
[Image: GTNXiIntegrationFolder.jpg]

Then confirm the presence of the folder contents:
[Image: GTNXiIntegrationContents1.jpg]

And then the WASM gauge:
[Image: GTNXiIntegrationContents2.jpg]

If all are present then the TDS GTNXi VC Integration gauge has installed correctly. If something is wrong or missing, please let us know and we will assist you.

2) Installing a MSFS G1000 MFD Replacement community mod:

To do so, please download the specific mod from the VC Integration website:
https://tdssim.com/gtnxivcintegration

Extract the files and then copy them to the Community folder as shown here:
[Image: CommunityWithAddon.jpg]


The sub folder of the files must have the layout.json/manifest.json and the SimObjects folder. If they are missing or are located in another sub folder, then this is a problem and please make sure that they are in the root VC Integration name folder, in this case: tds-gtnxi-c172sp
[Image: CommunityAddonData.jpg]
Reply
#2
(02-20-2022, 07:51 PM)admin Wrote: Hello,

Items to check for a G1000 MFD Integration Mod:

1) The presence of the TDS GTNXi integration files in the MSFS Community folder.

The first step is to navigate to the community folder and to confirm the presence of the integration folder, named tds-gtnxi-gauge as shown in the image below:
[Image: GTNXiIntegrationFolder.jpg]

Then confirm the presence of the folder contents:
[Image: GTNXiIntegrationContents1.jpg]

And then the WASM gauge:
[Image: GTNXiIntegrationContents2.jpg]

If all are present then the TDS GTNXi VC Integration gauge has installed correctly. If something is wrong or missing, please let us know and we will assist you.

2) Installing a MSFS G1000 MFD Replacement community mod:

To do so, please download the specific mod from the VC Integration website:
https://tdssim.com/gtnxivcintegration

Extract the files and then copy them to the Community folder as shown here:
[Image: CommunityWithAddon.jpg]


The sub folder of the files must have the layout.json/manifest.json and the SimObjects folder. If they are missing or are located in another sub folder, then this is a problem and please make sure that they are in the root VC Integration name folder, in this case: tds-gtnxi-c172sp
[Image: CommunityAddonData.jpg]
I do not have those first two files, only the aircraft specific mods.  I updated my GTN using the TDSGPS Manager and also tried reinstalling using the manager.  My version is 1.0.1.0.  How do I get these files.

Fixed by downloading a new manager.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)