VC Integration Mod for BN2 - Printable Version +- TDS Sim Software Forums (http://www.forum.tdssim.com) +-- Forum: TDS Sim Software (http://www.forum.tdssim.com/forum-1.html) +--- Forum: TDS GTNXi Flight Simulator (http://www.forum.tdssim.com/forum-2.html) +--- Thread: VC Integration Mod for BN2 (/thread-38.html)

VC Integration Mod for BN2 - johnbla - 06-04-2021 Hi all- Aircraft Integration - I am using this wonderful mod from Laurinius. It is working perfectly. I would like to create a mod for my BN2 from Blackbox. The instructions state:  "- Aircraft Integration - You can replace any screen/gauge in an aircraft by creating a mod of the panel.cfg. In the panel.cfg you only have to replace the existing gauge path with either NavSystems/gtn-screen-relay/gtnscreenrelay750.html or NavSystems/gtn-screen-relay/gtnscreenrelay650.html. For example, to integrate the GTN 650Xi screen into the Robin CAP-10 as replacement for the GNS 430 screen simply create a mod and change the line >> htmlgauge00=NavSystems/GPS/AS430/AS430.html, 0, 0, 350, 190 to >> htmlgauge00=NavSystems/gtn-screen-relay/gtnscreenrelay650.html, 0, 0, 350, 190 Also use the other aircraft integrations from this mod as an reference. I have no drama about being able to change my panel.cfg file, however I am at a loss on how to create a mod. Any help would be most welcome. Many thanks in advance. BTY, great GTN. Regards John RE: VC Integration Mod for BN2 - adminOwner2 - 06-04-2021 Hello John, My understanding is that if you already have the mod installed and working, then for other aircraft you would just need to modify the panel.cfg file. Are you trying to replace the 430 in the BN2 with the GTNXi 650? RE: VC Integration Mod for BN2 - johnbla - 06-04-2021 Hi, yes I am. When you download the mod, there are separate folders for a number of aircraft, each folder containing a layout.jason and a manifest.jason, as well as Simobjects. I appreciate that you guys are not the owners of the mod, so any help is much appreciated. John. RE: VC Integration Mod for BN2 - adminOwner2 - 06-04-2021 John, Let's try finding the panel.cfg file location, can you go in the MSFS community folder, then BlackBox BN2\SimObjects\Airplanes\JF_PA28_Arrow\panel Do you see a panel.cfg file? RE: VC Integration Mod for BN2 - johnbla - 06-04-2021 Hi, I have already changed the panel.cfg to reflect the GTN, but that didn't work. I think the problem is that you actually need to create a new mod for each individual aircraft. This is the part where I am stuck.  I have attached a screenshot to show you. RE: VC Integration Mod for BN2 - adminOwner2 - 06-04-2021 In that case, if you will send the panel.cfg file (original) of the BN2 to support@tdssim.com, we will do our best to assist you. RE: VC Integration Mod for BN2 - johnbla - 06-04-2021 Panel.cfg sent. Many thanks. John. RE: VC Integration Mod for BN2 - adminOwner2 - 06-05-2021 We have created a mod for the BlackBox BN2 which replaces the default GNS 530 with the TDS GTNXi 650. If anyone is interested, please ask us.