Hello,
I have a problem since version 1.0.0.1
I have a 3 screens configuration.
When I click on the GTN750Xi button in the TDS GRNXi application, I have a GTN750Xi window that opens on screen 1.
If I move this window inside screen 1 and I quit the application, when I restart the application and I do the same operation again (click on the GTN750Xi button) I have the GTN750Xi window that opens normally where I left it.
Until then everything is fine.
Now I move the GTN750Xi window in screen 2.
I quit the application.
I restart it. When I click on the GTN750Xi button, the window opens in screen 2, but it is all white.
I have to kill the application with the task manager and delete the TDSGTN.ini file so that the application can restart normally.
Same behavior with GTN650Xi

BR,
Marc

Translated with www.DeepL.com/Translator

After installing your product and running flight simulator, I cannot get the GTNxi to run in the same window as msfs without losing the msfs sound. What am I doing wrong here?

Hi,

I have a problem with my GTN750Xi with these parameters :
- Show Bezel OFF.
- LockAspect Ration OFF.
- Hide Window Frame OFF.

=> Nothing append when I click on Back, Menu, In and Out... and all buttons in this line (CDI, OBS, ...).

Regards.

Can we get a possibility to import MSFS generated .pln flight plans? I already converted plans using FS-FlightControl (can also be done using Little NavMap) into the .gfp format, and I know there are dedicated converters doing the job. However, I would much like to do it in one step. An even more preferred solution would be to directly import the flight plan generated in  the MSFS World Screen upon startup.

There may be issues with conversion, in which case the user could be informed, but in quite a number of cases I did so far conversion could be done flawless. The user can still be informed in case of issues, and perhaps be given choices or be informed if this special plan can't be handled.

Thanks for considering, Michael

Version 1.1.0.8 released 16.10.2024
New Feature: Synchronizing the A:COM VOLUME/A:NAV VOLUME between the MSFS AVars and the GTNXi Audio Panel. This feature is helpful for those flying on Vatsim/vPilot by using the Sim Volume Controller application
Bug Fix: Transponder code not being used after an avionics reset
Bug Fix: WT G3X Integration -> Arming NAV when HDG is active and being off track the flight plan
Bug Fix: WT G3X Integration -> Inserting a waypoint into an existing flight plan/active leg will result in a DTO to the next waypoint
Bug Fix: WT G3X Integration -> Removal of more than one waypoint from a procedure, such as an intersection followed by MANSEQ
Bug Fix: GTNXi input OBS not taking into account OBS1/OBS2 interface setting


Version 1.1.0.7 released 03.09.2024
New Feature: Setting MSFS COM/NAV audio volume based on GTNXi audio panel setting
Bug Fix: Resolved CTD when handling waypoints with 6 characters as part of a DTO
Bug Fix: Improvement to the moment when the glidepath indicators appears during an LPV approach. The glidepath indicator used to appear at the FAF, which was incorrect, now it will appear as soon as a waypoint that is part of the approach is active
Bug Fix: Synchronizing the current vertical speed for the FSS B727F upon initial autopilot engagement


Version 1.1.0.6 released 23.08.2024
Bug Fix: CTD when activating certain approaches
Bug Fix: TDS GTNXi Pro integration with WT G3X: Displaying a DTO from PPOS would sometimes result as a fixed course DTO
Bug Fix: TDS GTNXi Pro integration with WT G3X: Errors in handing DTO within a flight plan
Bug Fix: TDS GTNXi Pro integration with WT G3X: Correct management of duplicate waypoints when in different world regions
Bug Fix: Transponder automatically switching modes upon takeoff, from now on, the transponder mode must be set manually by the pilot


Version 1.1.0.5 released 01.08.2024
Bug Fix: Flight planning CTD when inserting more than one waypoint with the GTNXi PC Trainer V20.20.13


Version 1.1.0.4 released 01.08.2024
Beta Feature: Working Title G3X Touch Support
Performance Improvements: General performance improvements in VC integrated mode to reduce overall MSFS stuttering
New Feature: External Hardware Support Checkbox: this is an ongoing work in progress feature, in order tto facilitate external hardware by temporarily disabling the GNS 530/430
Bug Fix: Persistent SmartGlide message above FL360, especially in the FSW LJ35
Bug Fix: Intermittent black screen on startup which required a restart of the main application
Bug Fix: Navigraph Charts not working due to a non standard location of the Windows Temp folder
Bug Fix: Direct3D 11 Windows Event Log _unload errors
Bug Fix: Loading GFP flight plans which contain airways sometimes would cause locked waypoints
Bug Fix; SWS RV-8 Steam gauge autopilot vertical mode handling
Code changes: Autopilot logic in preparation for WT G3X support


Version 1.1.0.3 released 11.07.2024
New Feature: Support for FSAvionix GTN Xi 750 and 650 hardware (www.fsavionix.com)
New Feature: Support for Windows touchscreen gestures in standalone mode (zooming) called "pinch to zoom" as used on smartphones and other touch devices
Internal code changes in preparation for next release which will contain bug fixes


Version 1.1.0.2 released 19.04.2024
Bug Fix: TDS GTNXi Not shutting down when avionics/electrical is turned off
Bug Fix: TDS GTNXi Pro Navdata - Fixed CTD when searching by facility name - new discoveries from the previous bug fix, the feature should be solid now


Version 1.1.0.1 released 04.04.2024

New Feature: TDS GTNXi Pro Navdata - VRP (Visual Reference Points) for North America, Australia, Europe, etc
Bug Fix: TDS GTNXi Pro Navdata - Airways incorrectly being broken up across different world regions
Bug Fix: TDS GTNXi Pro Navdata - Incorrect rounding of certain airport communication frequencies
Bug Fix: TDS GTNXi Pro Navdata - Incorrect LPV glidepath data (altitude) for certain approaches, mostly in Europe
Bug Fix: TDS GTNXi Pro Navdata - Missing waypoints when inserting arrivals a few procedures, such as arrivals for EDDV, CYVR, FACT, etc
Bug Fix: TDS GTNXi Pro Navdata - Fixed CTD when searching by facility name
Bug Fix: TDS GTNXi Pro Navdata and Charts - Incorrect effective to date on the database info/startup page
Bug Fix: TDS GTNXi Pro Charts - Sometimes charts would fail displaying under rare conditions
Bug Fix: TDS GTNXi Pro Charts - Safeguards against too frequent connection attempts


Version 1.1.0.0 released 29.02.2024
Initial TDS GTNXi Pro version with navigraph Navdata and Navigraph Charts


Version 1.0.4.2 released 22.02.2024

Bug Fix: FSW LJ35 NAV mode disconnect when the autopilot was disengaged
Bug Fix: Fix for erroneously setting radio LVars in BlackSquare aircraft



Version 1.0.4.1 released 09.02.2024

Bug Fix: Improvement to METAR loading time on startup



Version 1.0.4.0 released 09.02.2024
Bug Fix: METAR not working anymore due to server disruption
Bug Fix: Tentative fix: extremely rare GTNXi sound volume slider controlling the main Windows volume
Performance Improvements inside MSFS as a VC integrated gauge, both in regular mode as well as VR

As a future goal, we are looking into other possibilities on handling the METAR server changes without having to update the TDS GTNXi.


Version 1.0.3.9 released 23.01.2023
Bug fix: Radio frequencies not sticking, especially after starting a new flight/restrating the current flight. This was most visible with NAV frequencies not swapping.
The extent of the bug is unknown, so we strongly suggest to update to the latest TDS GTNXi version!


Version 1.0.3.8
Internal release


Version 1.0.3.7 released 16.01.2023
Bug Fix: Minor Autopilot Fixes for the Flysimware Learjet 35A


Version 1.0.3.6 released 16.01.2023
Bug Fix: Minor Autopilot Fixes for the Flysimware Learjet 35A


Version 1.0.3.5 released 09.01.2023
Bug Fix: Autopilot Fixes for the Flysimware Learjet 35A


Version 1.0.3.4 released 08.01.2023
Bug Fix: Autopilot ALT HOLD and other minor fixes for the Flysimware Learjet 35A
Bug Fix: SWS PC-12 ALT Alerter/VS mode issuing an immediate descent
Bug Fix: Issues with different GPS units not operating properly inside Flysimware aircraft only when changing liveries


Version 1.0.3.3 released 19.12.2023
Bug Fix: Autopilot lights/modes failing to operate in SWS PC-12 after aircraft reload
Bug Fix: VS Wheel not working under certain conditions
Bug Fix: Black Square products having certain autopilot issues
Bug Fix: Autopilot bugs with aircraft which do not have a flight director installed


Version 1.0.3.2 released 04.11.2023
Bug Fix: Rare CTDs with HPG H160 and possibly other aircraft add-ons (Black Square TBM)
Performance Improvements


Version 1.0.3.1 released 21.10.2023
Bug Fix: Electrical Circuits not set correctly in the upcoming SWS PC-12
Bug Fix: METAR not working anymore due to server disruption
Bug Fix: Autopilot TOGA button not working
Bug Fix: Autopilot logic improvements



Version 1.0.3.0 released 17.08.2023
Bug Fix - Just Flight Piper Arrow, Turbo Arrow, Warrior autopilot not working correctly - requires updating to the latest version of the JF Pipers and TDS GTNXi
Bug Fix - Correct capture of altitude for FSW C414 in IAS mode



Version 1.0.2.9 released 15.08.2023
Bug Fix - IAS mode in FSW C414
Bug Fix - Distance to Next waypoint variable not set correctly (Black Square KingAir)



Version 1.0.2.8 released 08.08.2023
Special Implementation - A2A Comanche Fuel Flow


Version 1.0.2.7 released 05.06.2023
Bug Fix - FSW C414 FLC Mode


Version 1.0.2.6 released 02.06.2023
New Feature - 2211 Navigation and Charts databases via Aviation Trainer Launcher version 3.6.4.0


Version 1.0.2.5 released 01.05.2023

New Feature - GTNXi PC Trainer V20.30.8 support
New Feature - Performance improvements for Hardware GPU Scheduling enabled with the new GTNXi PC Trainer V20.30.8, there is no need to disable GPU Hardware Scheduling (HAGS) anymore provided you have the GTNXi PC Trainer V20.30.8
New Feature - TDS GTNXi turns off internally if it is not the selected GPS navigator - improved performance
New Feature - Electrical Circuit Support - the TDS GTNXi can be attached to specific electrical circuits for aircraft that support this feature (HPG H145, SWS RV-10)

Bug Fix - Just Flight Pipers proper autopilot control in holds, procedure turns, DME Arcs
Bug Fix - Manual Typo for Custom VFR Code INI file section name

WIP Feature - Ability to display  Standalone mode when using VC Integrated aircraft (currently the VC integrated gauge will be black and this is a working in progress feature). This feature allows for running external hardware (RSG and others to be able to fully enjoy the autopilot and draw the GTN750Xi and GTN650Xi to a secondary monitor.
Requires creating a dummy text file called "Standalone.txt" in the installation path: "C:\ProgramData\TDS\GTNXi"
We plan on further expanding this feature and creating a more user friendly interface in future versions, but we have released this feature now so customers can enjoy this functionality


Version 1.0.2.4 released 28.02.2023
Bug Fix: Seamless management of TDS GTNXi WT GNS hot swap for Black Square aircraft (requires latest version of each aircraft)


Version 1.0.2.3 released 02.02.2023
Bug Fix: Autopilot Modes not engaging correctly under certain situations
New Feature: Better support for Black Square aircraft
New Feature: Better support for Carenado aircraft


Version 1.0.2.2 released 23.12.2022
New Feature: Ability to disable TDS GTNXI internal autopilot/GPS variables for add-on aircraft which have multiple GPS options which can be toggled from the virtual tablet.
Bug Fix: Minor display alignment on the standalone GTN650Xi


Version 1.0.2.1 released 04.12.2022
Bug Fix: Resolved all compatibility issues with Working Title GNS 530/430: touchscreen capability and autopilot/variable functionality for these aircraft
Black Square KingAir
BlackSquare Caravan
Milviz C310
Carenado PC12
OrbX PAC750
JustFlight Piper Arrow
JustFlight Piper Turbo Arrow III
JustFlight Piper Turbo Arrow IV
JustFlight Piper Warrior II

Important Note: Requires Version 1.0.3 of the Working Title GNS 530/430 which can be updated from within MSFS/Community Manager/Marketplace
We would like to thank the Working Title team for their quick and professional resolution to this issue!

Bug fix: minor bug fixes and performance improvements


Version 1.0.2.0 released 13.10.2022
New Feature: Worldwide live METAR accessed from the Airport page
Bug Fix: CTD on startup in some rare cases
Bug Fix: Better autopilot control in VS/Pitch mode
Bug Fix: Altitude Alerter not working in certain add-ons

Version 1.0.1.9 released 29.08.2022
Bug Fix: Altitude Hold with WT G1000 NXi as the primary navigator and TDS GTNXi working in background
Bug Fix: Ability not to override the approach mode when the TDS GTNXi is not the primary navigator. This feature extends to other modes
Bug Fix: Altitude capture when in pitch mode with the FSW C414
Bug Fix: Coordination with default G5 navigation source, as seen in the AzurPoly TB-30
Other minor bug fixes and performance improvements


Version 1.0.1.8 released 04.06.2022
Bug Fix: VLOC/GPS switch not correlating with simulator variable/other 3rd party switches
Bug Fix: Autopilot NAV/APR Armed capability when HDG is engaged and no active flight plan/DTO data in the GTNXi
Bug Fix: GTNXi Unit Startup Message when a new version is available - new bug


Version 1.0.1.7 released 31.05.2022

New Feature/Bug Fix: Lateral Autopilot control for the HPG H145
New Feature: Upon GTNXi startup procedure, the MSFS NAV/GPS switch will be changed to GPS so the GTNXi Instrument Panel Self test will always function
Bug Fix: GTNXi Unit Startup Message when a new version is available
Bug Fix: Better Com/NAV frequency hadling with MSFS
Bug Fix: Correct Date/Time upon load, before connecting to MSFS
Bug Fix: Display of Selected Altitude ARC on the map page
Bug Fix: Rare case of the GTNXi display being stretched horizontally and the mouse clicks would not correlate with the screen

Latest TDS GPS Manager version 1.0.1.0 released 31.05.2022
Bug Fix: Ability to select desired MSFS Simulator version (Windows Store or Steam) for the rare cases where there are multiple installed versions due to a MSFS beta/dual install


Version 1.0.1.6 released 28.04.2022

Bug Fix: VLOC/GPS switch using Just Flight Pipers
Bug Pix: Improvements to the COM/NAV radio frequency handling


Version 1.0.1.5 released 28.04.2022

Bug Fix: Startup CTD under very rare circumstances
Bug Fix: Lateral Deviation SimVars not correlate with the selected GTNXi sensitivity, as seen during approaches and SmartGlide

Latest TDS GPS Manager version 1.0.0.9 released 28.04.2022



Version 1.0.1.4 released 26.04.2022

New Feature: Glidepath variable display as a default MSFS variable: correlated to both the default G1000/G3X/G5 standby displays, as well as HSI variable display for non glass avionics
Bug Fix: Flying an ILS approach coupled with the MSFS Autopilot in APR mode would not intercept LOC/GS
Bug Fix: Selected Altitude Range Arc (Cyan Altitude Banana) under the newest PC Trainer not displaying
Bug Fix: CTD or no autopilot functionality with the GTNXi PC Trainer v20.12.27
New Feature: Disable the GPU Hardware Scheduling On Warning Pop-uyp on startup - The procedure to disable the warning is described in the manual

Note: While the TDS GTNXi does not need to be updated with each MSFS Service Update (SU) release, we suggest updating the TDS GTNXi to the latest version so you can benefit from the latest features only available in the Service Update!




Version 1.0.1.3 released 10.04.2022



Bug Fix: Com/Nav frequencies not being set correct

Bug Fix: Autopilot Nav/Apr mode sometimes not being set correctly internally

Bug Fix: Ability to disable default system timezone within the interface/settings tab

Bug Fix: Fix for black screen within VC Integrated version with dual MSFS installations from Windows Store and Steam

Bug Fix: Selected Altitude Range Arc (Cyan Altitude Banana) under the newest PC Trainer not displaying

Bug Fix: Flying Holds correctly using the Just Flight PA28s

Bug Fix: Better approach handling

New Feature: Interface message pop-up when a dual MSFS installation from Windows Store and Steam detected

New Feature: Message pop-up when Hardware GPU Scheduling detected (More information in the forum performance thread)

General Performance improvements


Regarding performance improvements, we recommend that all users read and apply our fixes from the forum Performance thread, this thread is being updated as soon as we have new data available.


Latest TDS GPS Manager version 1.0.0.8 released 10.04.2022




Version 1.0.1.2 released 23.02.2022



Bug Fix: Fix Black screen with any VC Integration - This was a bug related to the Steam version of MSFS and Beta versions having remnants
To update to the latest version, please use the TDS GPS Manager version 1.0.0.7
Bug Fix: Mono Audio when playing GTNXi sounds
Bug Fix: Com/Nav frequencies not transferring correctly to MSFS with the 650Xi

Latest TDS GPS Manager version 1.0.0.7 released 23.02.2022




Version 1.0.1.1 released 21.02.2022

Important Bug Fix: Fix Black screen with G1000 MFD VC Integration - This was a bug related to the Steam version of MSFS.
To update to the latest version, please use the TDS GPS Manager version 1.0.0.6




Version 1.0.1.0 released 18.02.2022



New Feature: Full Virtual Cockpit Integration as described in the official integration webpage:
https://tdssim.com/gtnxivcintegration

Note: Requires version 1.0.0.6 of the TDS GPS Manager!



Latest TDS GPS Manager version 1.0.0.6 released 18.02.2022



Version 1.0.0.9 released 26.12.2021


Bug Fix: Improved Autopilot Approach and crashes


Version 1.0.0.8 released 17.12.2021


New Feature: Major Autopilot improvements - a totally smooth autopilot without any jitters
New Feature: Flight Director correlation with the autopilot
New Feature: Default Flight Simulator GPS variables are being written to MSFS so they display correctly on the HSI (except for the glidepath)
New Feature: Support for the latest PC Trainer with 2104 databases
Bug Fix: Windows 11 CTDs and compatibility
Bug Fix: TCAS fixes and improvements
Bug Fix: Transponder system improvements


Latest TDS GPS Manager version 1.0.0.4 released 17.12.2021


Version 1.0.0.5 released 30.06.2021

New Feature: Dimming of displays via the Settings tab from the interface
Bug Fix: Window positions not saving under certain conditions
Bug Fix: White window under certain multi-monitor configurations
Bug Fix: Main Interface, Settings tab Typo
Bug Fix: CTD when the autopilot is in Heading mode
Bug Fix: Random Simconnect dropping the connection



Version 1.0.0.4 released 09.06.2021


Bug Fix: Transponder and audio panel not working



Version 1.0.0.3 released 09.06.2021


Bug Fix: Antivirus false positive warnings - Second Attempt


Version 1.0.0.2 released 09.06.2021
Bug Fix: Antivirus false positive warnings - First Attempt
Bug Fix: Autopilot is not in control when the VLOC/GPS switch is in VLOC mode
New Feature: Remove Window Frames
Bug Fix: Auto Close of PC Trainer if there are problems with the main Executable
Bug Fix: Occasional flickering of the main interface



Latest TDS GPS Manager version 1.0.0.3 released 28.05.2021
Bug Fix: MSFS Steam installation resulting in empty TDS GTNXi field

Version 1.0.0.1 released 24.05.2021

New Feature: Remove Window Frame
Bug Fix: Black Screen on the GTNXi 750 and GTNXi 650
Bug Fix: Lock Screen Ratio GTNXi 650
Bug Fix: TDS GPS Manger: Invalid Email/Password

Version 1.0.0.0 released 17.05.2021

Bonjour

Windows 10 PRO version 1909
Anti virus désactivé
Aucun avertissement à l'installation
Flight sim en vert à la connection de FS20

un apperçu d'erreur
[24/05/2021 09:49:08.370 000020a0 ERROR] DETECTED CDP DLL: ..\..\src\uic\uic_init_prj.c , prj_uic_error_handler ..\..\lib\acl\uic\modules\rndr\uic_native_font.c: 237 error 36. , 706 , 0 , 562358036
[24/05/2021 09:49:08.370 000020a0 ERROR] DETECTED CDP DLL: ..\..\src\uic\uic_init_prj.c , prj_uic_error_handler ..\..\lib\acl\uic\modules\text\uic_text_font_pure.c: 233 error 36. , 706 , 0 , 562358172
[24/05/2021 09:49:08.370 000020a0 ERROR] DETECTED CDP DLL: ..\..\src\uic\uic_init_prj.c , prj_uic_error_handler ..\..\lib\acl\uic\modules\texture\uic_texture_linking.c: 836 error 36. , 706 , 0 , 562358256
[24/05/2021 09:49:08.370 000020a0 ERROR] DETECTED CDP DLL: ..\..\src\uic\uic_init_prj.c , prj_uic_error_handler ..\..\lib\acl\uic\modules\text\uic_text_draw.c: 445 error 13. , 706 , 0 , 562358284
[24/05/2021 09:49:08.545 00001a64 INFO] Ending Process


Voilà ou j'en suis, merci de votre aide

Hello


Windows 10 PRO version 1909
Anti virus disabled
No warning during installation
Flight sim in green when connecting FS20


an error preview


[24/05/2021 09:49:08.370 000020a0 ERROR] DETECTED CDP DLL: ..\..\src\uic\uic_init_prj.c , prj_uic_error_handler ..\..\lib\acl\uic\modules\rndr\uic_native_font.c: 237 error 36. , 706 , 0 , 562358036
[24/05/2021 09:49:08.370 000020a0 ERROR] DETECTED CDP DLL: ..\..\src\uic\uic_init_prj.c , prj_uic_error_handler ..\..\lib\acl\uic\modules\text\uic_text_font_pure.c: 233 error 36. , 706 , 0 , 562358172
[24/05/2021 09:49:08.370 000020a0 ERROR] DETECTED CDP DLL: ..\..\src\uic\uic_init_prj.c , prj_uic_error_handler ..\..\lib\acl\uic\modules\texture\uic_texture_linking.c: 836 error 36. , 706 , 0 , 562358256
[24/05/2021 09:49:08.370 000020a0 ERROR] DETECTED CDP DLL: ..\..\src\uic\uic_init_prj.c , prj_uic_error_handler ..\..\lib\acl\uic\modules\text\uic_text_draw.c: 445 error 13. , 706 , 0 , 562358284
[24/05/2021 09:49:08.545 00001a64 INFO] Ending Process


Here I am, thanks for your help

Is this new TDS GTNxi able to receive AIRAC updates through Navigraph or some other method?

Regards,
Dane

I am also use the GTN750 by PMS50.  They have already linked our Navigraph accounts into their device and their weather button gives them METAR data.   They are doing it for free.   I like you device because I can easily put it unto another touch monitor and your touchscreen is better than theirs. 

They have also linked their device into many of the MSFS airplanes.

Will we see these capabilities implemented into your pay version?

Thanks.

Will this correctly show the glideslope indicator for all approaches? (E.g. on the HSI)?
For example with the inbuilt GPS the default and Carenado planes only show the glideslope for ILS in the steam cockpit gauges, not for RNAV etc. Only the Just Flight Arrow shows a glideslope for RNAV approaches.

With this GTN, will it work on all planes?

Thanks

Can the GTN 750xi and 650xi be active/used simultaneously?