Hello,
i have problem with GNS 750. There is missing airport ENSA, but in standard Garmin is visible. Can you help me how to fix the problem? Please find attached photoscreen.
Thank you in advance.
Best regards
Tomas

Attached Files

Thumbnail(s)
           

Hi,

I’ve been using the TDS GTNXi 750 in MSFS 2020 and noticed something unusual with the TCAS system. During takeoff, I often get a yellow traffic advisory (TA) alert when passing near parked aircraft at the gates, even though they are stationary.

I was wondering if this is expected behavior? I tried disabling AI/live traffic, and the issue seemed to disappear, so I’m curious if TCAS might be detecting ground traffic in a way that isn’t typical. As far as I know, TCAS usually filters out stationary aircraft on the ground, but I’m not sure if that applies in this case.

Is there any setting I might adjust to change this behavior, or is it something that has been noted before?

Thanks for your time, I appreciate any insights you can provide!

Dumb question.  When I open the installer, I see X-plane 11 install button, but not the X-Plane 12 install button.

Any thoughts?

Thanks

Graham

will it work at same point? The option (system/setup) is greyed out.

I fly it currently with the EC135, the Bo105 and the Bell 206, and I
really like it. Will it be possible to exchange x-planes standart 430
with the GTN 650?

Great stuff anyways,
keep it up,

fingertrouble.

I've been unsuccessful in getting the GTN display to work in MSFS 2024 with the Velocity XL. I have confirmed that the GTNXi Flight Sim seems to indicate that the flight simulator status is connected. I just purchased/downloaded this, so I'm operating the most recent version.

On MSFS, when I select the G TDS-IRTI Liverie I do see the GTN750 display come on and operate normally.

On the MSFS 2024 display is says to download the PMS50 software and gives a web address. I followed instructions to copy the Velocity XL from the community folder from FS 2020, so I believe I did everything correctly. It is strange though that for the liveries in 2024, the aircraft designator is followed by a "PMS.." rather than TDS in 2020.

Thanks for your help.

Attached Files

Thumbnail(s)
       

FPN/RI:F:KSNA:F:SLI,N33470W118033.V23.POPPR.SMO125.SMO,N34006W118274.SMO317.CANOG:F:KVNY



this is what i placed in FPL folder programdata/tds/gtn/fpl

it is a .gfp file

xplane 12 stock baron

import button is available but when pressed gtn says import failed?

i have found most of the time i am just misunderstanding how to do something, so i appreciate your support.  thanks!!

Good day,

Yesterday I purchased the TDSGTN750xi for my X-aviation Citation 525 aircraft on xplane 12.
I installed everything as published and removed everything from the other GTN750 program I used to use.
Everything works well the first couple of minutes, but then I see a small TDS box and the first display freezes. Within a minute the same happens for the second display.

The file in the C:/documents states the next lines:

 [01/03/2025 10:53:57.698 00003dec INFO] TDSGTNXIXPlane.dll version 1.0.0.1
[01/03/2025 10:54:00.336 00003dec INFO] Received XPL Monitor index 0 with pxLeft: 0, pxTop: 1080, pxRight: 2560, pxBottom: 0
[01/03/2025 11:02:42.098 000046ac INFO] Got Version: 10
[01/03/2025 11:02:43.175 000046ac INFO] GTNProxy::Open Services DLL Version: 1.0.0.1
[01/03/2025 11:02:46.081 000046ac INFO] Got Version: 10
[01/03/2025 11:02:46.082 000046ac INFO] GTNProxy::Open Services DLL Version: 1.0.0.1
[01/03/2025 11:10:16.795 000046ac ERROR] Error closing program: 1400
[01/03/2025 11:10:16.837 000046ac ERROR] Error closing program: 1400
[01/03/2025 11:12:27.226 00003dec INFO] TDSGTNXPlane Plugin Stopping

Is there anyone that can tell me what I am doing wrong here, and hopefully what the solution could be?
I am new on this platform so if I am publishing the wrong way, I am sorry in advance.

I am not IT savvy.  having said that i have been simming for ahwile and have gotten this far......how in the world do you make the GTN pop up on a second monitor?  I am using space desk to make my android tablet the second monitor.  I am able to drag over the entire xplane program, but i cant drag the gtn pop up window over.  what am i missing?  thank you! nice to have an updatable gtn.

Version 1.0.0.2 released 14.03.2021

Bug Fix: Legacy VC setting correct position datarefs for the Rotorsim EC135
Bug Fix: Incorrect TX flag display with xPilot
Bug Fix: Incorrectly setting the NAV OBS Datarefs when in VLOC mode
Bug Fix: Losing focus of main X-Plane 11 window on startup of each GTNXi unit


Version 1.0.0.1 released 27.02.2021

Bug Fix: Legacy VC Menu item not updating radio button
Bug Fix: Resolved Legacy VC CTD with Rotorsim EC135
Bug Fix: Resolved Legacy VC CTD with Leading Edge Simulations Beech C23
Bug Fix: TDS HSI DME Speeed/Tim Datarefs only display past 5kts
Bug Fix: Knob commands triggering too rapidly when using keyboard/joystick controls
Bug Fix: Intermittent CTDs when loading XPlane
New Feature: Settings Window option to disable VOR auto slew (nav obs datarefs)

Version 1.0.0.0 released 21.02.2025

Getting an error when trying to update from v1201 to v1203 with tds manager
See attached. https://www.dropbox.com/scl/fi/iruqh7ebq...zti3a&dl=0
Thanks, David

Attached Files

  Doc1.docx (Size: 724.72 KB / Downloads: 7)