02-21-2024, 09:49 PM
(This post was last modified: 02-21-2024, 09:55 PM by davenicoll.)
Hi guys,
I have RSG 750 and 650 hardware units...
When I tune the ATIS into the standby on the 650 I can transfer it to the active fine, however within about 2 seconds it automatically switches back to standby.
I have Com 2 monitored on the 750 and in the settings for the 650 set to Com2/Nav2
Thank you...
I have RSG 750 and 650 hardware units...
When I tune the ATIS into the standby on the 650 I can transfer it to the active fine, however within about 2 seconds it automatically switches back to standby.
I have Com 2 monitored on the 750 and in the settings for the 650 set to Com2/Nav2
Thank you...