11-29-2022, 11:25 PM
(11-29-2022, 08:13 AM)Gunslinger9155 Wrote: Good news! I re-installed the Blackbird Simulations Cessna 310R, and voila, problem solved!
Not so good news...in my glee, I started setting up a flight plan on the ramp and while clicking around the airport information screen, both displays froze. Turned the avionics master off/on, no change still frozen where i left them. Using the tablet, chose different avionics and then back to 750, no change.
Restarted aircraft at same airfield. Autopilot and G5s are ok, but GTNs are both blank!
Restarted from main menu, same, both blank. It's like the GTN just went away.
Exited the sim and then re-entered. GTNs are back and Autopilot is ok. I completed a 40 minute flight. Auto pilot tracked perfectly, loaded an approach and followed fine. VNAV enabled but did not track, might be user error here. Hand landed and input a new flight plan and got airborne again. Shortly after take-off both GTN 750s froze. I was able to get the ASOBO 530 GPS units to work but the autopilot would not track.
Frustrated. One step forward one step back.
Hello,
Can you confirm that the avionics power is set to ON?
Let's make sure that you do not have any conflicting add-ons. Please make sure that, temporarily, you have removed both the PMS 750 and the WT 530. After confirming this, please let us know if the TDS GTNXi will ever freeze and if it does, we will have to get in touch for some step by step instructions on confirming the nature of the freeze.
Not to worry, we will get this problem solved, we always do.