Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cessna 310R Bendix King Autopilot not lit
#9
Good news!  I re-installed the Blackbird Simulations Cessna 310R, and voila, problem solved!

Not so good news...in my glee, I started setting up a flight plan on the ramp and while clicking around the airport information screen, both displays froze.  Turned the avionics master off/on, no change still frozen where i left them.  Using the tablet, chose different avionics and then back to 750, no change.  

Restarted aircraft at same airfield.  Autopilot and G5s are ok, but GTNs are both blank!

Restarted from main menu, same, both blank.  It's like the GTN just went away.

Exited the sim and then re-entered.  GTNs are back and Autopilot is ok.  I completed a 40 minute flight.  Auto pilot tracked perfectly, loaded an approach and followed fine.  VNAV enabled but did not track, might be user error here.  Hand landed and input a new flight plan and got airborne again.  Shortly after take-off both GTN 750s froze.  I was able to get the ASOBO 530 GPS units to work but the autopilot would not track.

Frustrated.  One step forward one step back.
Reply


Messages In This Thread
RE: Cessna 310R Bendix King Autopilot not lit - by Gunslinger9155 - 11-29-2022, 08:13 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)