04-01-2022, 04:50 PM
Hi,
The install of the trainer and the software seemed to go fine.
It works a a stand alone pop out type screen. I have the green connected to sim message, but the cockpit 750 remains off (I made sure it was the correct livery for the GTNXI 750).
I read your response to the same problem yesterday, I checked I was running version 1.0.0.7 and also checked the community folder for the tds-gtnxi-gauge folder, but it wasn't there.
I had a look at the log files, and may have spotted a problem. The TDSGTNXiExel log shows:
[01/04/2022 12:10:15.026 00004f7c INFO] TDSGTNXiFlightSimEXE.exe version 1.0.1.2
[01/04/2022 12:10:15.102 00005ce8 INFO] Detected double installation of MSFS from Windows Store and Steam
[01/04/2022 12:10:15.251 00003564 INFO] Got Version: 8
[01/04/2022 12:10:16.150 00003564 INFO] GTNProxy::Open Services DLL Version: 1.0.1.2
[01/04/2022 12:10:19.049 00003564 INFO] Got Version: 8
[01/04/2022 12:10:19.049 00003564 INFO] GTNProxy::Open Services DLL Version: 1.0.1.2
[01/04/2022 12:36:55.926 00004ba0 ERROR] Received Simconnect Exception with id: 1 and val: 3
[01/04/2022 12:37:02.461 00004ba0 ERROR] Received Simconnect Exception with id: 1 and val: 3
[01/04/2022 13:51:50.838 00004ba0 INFO] Received Simconnect Quit
[01/04/2022 13:51:50.967 00004ba0 INFO] Closing program automatically with MSFS
[01/04/2022 13:51:50.969 00004f7c INFO] Received Exit Message
[01/04/2022 13:51:51.165 00004f7c INFO] Ending EXE Process
It's detected a double installation of the Steam version and the Store version. I never fully installed the Steam version, the install kept hanging, eventually I installed the Store version instead.
Could this be why I don't have the Gauges folder in my Community folder?
Just for information, this is the 750 unit log:
[01/04/2022 12:10:16.846 0000491c INFO] TDSGTNServices.dll version 1.0.1.2
[01/04/2022 13:51:51.272 0000491c INFO] Ending Process
Thanks
Eugene
The install of the trainer and the software seemed to go fine.
It works a a stand alone pop out type screen. I have the green connected to sim message, but the cockpit 750 remains off (I made sure it was the correct livery for the GTNXI 750).
I read your response to the same problem yesterday, I checked I was running version 1.0.0.7 and also checked the community folder for the tds-gtnxi-gauge folder, but it wasn't there.
I had a look at the log files, and may have spotted a problem. The TDSGTNXiExel log shows:
[01/04/2022 12:10:15.026 00004f7c INFO] TDSGTNXiFlightSimEXE.exe version 1.0.1.2
[01/04/2022 12:10:15.102 00005ce8 INFO] Detected double installation of MSFS from Windows Store and Steam
[01/04/2022 12:10:15.251 00003564 INFO] Got Version: 8
[01/04/2022 12:10:16.150 00003564 INFO] GTNProxy::Open Services DLL Version: 1.0.1.2
[01/04/2022 12:10:19.049 00003564 INFO] Got Version: 8
[01/04/2022 12:10:19.049 00003564 INFO] GTNProxy::Open Services DLL Version: 1.0.1.2
[01/04/2022 12:36:55.926 00004ba0 ERROR] Received Simconnect Exception with id: 1 and val: 3
[01/04/2022 12:37:02.461 00004ba0 ERROR] Received Simconnect Exception with id: 1 and val: 3
[01/04/2022 13:51:50.838 00004ba0 INFO] Received Simconnect Quit
[01/04/2022 13:51:50.967 00004ba0 INFO] Closing program automatically with MSFS
[01/04/2022 13:51:50.969 00004f7c INFO] Received Exit Message
[01/04/2022 13:51:51.165 00004f7c INFO] Ending EXE Process
It's detected a double installation of the Steam version and the Store version. I never fully installed the Steam version, the install kept hanging, eventually I installed the Store version instead.
Could this be why I don't have the Gauges folder in my Community folder?
Just for information, this is the 750 unit log:
[01/04/2022 12:10:16.846 0000491c INFO] TDSGTNServices.dll version 1.0.1.2
[01/04/2022 13:51:51.272 0000491c INFO] Ending Process
Thanks
Eugene