(03-28-2022, 12:12 AM)Pilot26U Wrote:

(03-27-2022, 10:51 PM)admin Wrote:

(03-27-2022, 01:23 PM)Bentree Wrote: Great feature, but unfortunately i have may stutters using the TDS GTN750 in this aircraft. When i use it outsite the cockpit (on a second display i have less stutters). In the JF Arrow i don't have that problem by the way. I already set FR in the nVidia controller to max 30, that helped a bit but still stutters (my videocard is an G-Force 3090).

Are you a part of our Discord channel? If not, we suggest to join it and visit the community-support section, there is a potential fix on the stutters.

I have the same issue. So bad that the sim is completely unusable with this software. I have a machine which reliably runs everything on “high” at 30+ FPS. I’ve disabled the GPU acceleration in Windows.

(03-28-2022, 12:14 AM)admin Wrote:

(03-28-2022, 12:12 AM)Pilot26U Wrote:

(03-27-2022, 10:51 PM)admin Wrote:

(03-27-2022, 01:23 PM)Bentree Wrote: Great feature, but unfortunately i have may stutters using the TDS GTN750 in this aircraft. When i use it outsite the cockpit (on a second display i have less stutters). In the JF Arrow i don't have that problem by the way. I already set FR in the nVidia controller to max 30, that helped a bit but still stutters (my videocard is an G-Force 3090).

Are you a part of our Discord channel? If not, we suggest to join it and visit the community-support section, there is a potential fix on the stutters.

I have the same issue. So bad that the sim is completely unusable with this software. I have a machine which reliably runs everything on “high” at 30+ FPS. I’ve disabled the GPU acceleration in Windows.

Hello,

Did you attempt the potential fix from our Discord channel?

(03-28-2022, 12:17 AM)Pilot26U Wrote:

(03-28-2022, 12:14 AM)admin Wrote:

(03-28-2022, 12:12 AM)Pilot26U Wrote:

(03-27-2022, 10:51 PM)admin Wrote:

(03-27-2022, 01:23 PM)Bentree Wrote: Great feature, but unfortunately i have may stutters using the TDS GTN750 in this aircraft. When i use it outsite the cockpit (on a second display i have less stutters). In the JF Arrow i don't have that problem by the way. I already set FR in the nVidia controller to max 30, that helped a bit but still stutters (my videocard is an G-Force 3090).

Are you a part of our Discord channel? If not, we suggest to join it and visit the community-support section, there is a potential fix on the stutters.

I have the same issue. So bad that the sim is completely unusable with this software. I have a machine which reliably runs everything on “high” at 30+ FPS. I’ve disabled the GPU acceleration in Windows.

Hello,

Did you attempt the potential fix from our Discord channel?

No. 1) I don’t use Discord. 2) I don’t know how to use Discord. Old guy here who isn’t real big on social networking stuff.

(03-28-2022, 12:36 AM)admin Wrote:

(03-28-2022, 12:17 AM)Pilot26U Wrote:

(03-28-2022, 12:14 AM)admin Wrote:

(03-28-2022, 12:12 AM)Pilot26U Wrote:

(03-27-2022, 10:51 PM)admin Wrote: Are you a part of our Discord channel? If not, we suggest to join it and visit the community-support section, there is a potential fix on the stutters.

I have the same issue. So bad that the sim is completely unusable with this software. I have a machine which reliably runs everything on “high” at 30+ FPS. I’ve disabled the GPU acceleration in Windows.

Hello,

Did you attempt the potential fix from our Discord channel?

No. 1) I don’t use Discord. 2) I don’t know how to use Discord. Old guy here who isn’t real big on social networking stuff.

Hello,

We understand your frustration and we are here to help. There is a potential fix for this problem, confirmed by many customers. Can you please email us at: support@tdssim.com and we will send you the fix.

Please understand that with software, sometimes, under certain configurations, problems do occur. However, we are here to support our product and assist our customers in finding a proper solution.

Thank you for understanding us.

(03-29-2022, 03:37 AM)olddogg Wrote: I can not get the display for the TDS GTNXi to display in the VC.  The TDS GTNXi operates in stand-alone mode until I select a 414A livery that incorporates the GTN 750 and then the the stand-alone display disappears and the TDS software shows TDS GTNXi is in guage mode.  The GTN 750 does not show in the VC.  I have reinstalled and searched for a solution but I have missed it.  Hopefully you can help me out.  Thank you.
Bill

(03-29-2022, 10:32 AM)admin Wrote:

(03-29-2022, 03:37 AM)olddogg Wrote: I can not get the display for the TDS GTNXi to display in the VC.  The TDS GTNXi operates in stand-alone mode until I select a 414A livery that incorporates the GTN 750 and then the the stand-alone display disappears and the TDS software shows TDS GTNXi is in guage mode.  The GTN 750 does not show in the VC.  I have reinstalled and searched for a solution but I have missed it.  Hopefully you can help me out.  Thank you.
Bill

Hello Bill,

Do not worry, we will help you get this problem sorted. The first and most important question is: do you have installed multiple versions of MSFS, as in one purchased from Steam and the other from the Windows Store? When you first started the TDS GTNXi, did you get a message box pop-up asking you which version of MSFS to use?

(03-29-2022, 05:37 PM)olddogg Wrote:

(03-29-2022, 10:32 AM)admin Wrote:

(03-29-2022, 03:37 AM)olddogg Wrote: I can not get the display for the TDS GTNXi to display in the VC.  The TDS GTNXi operates in stand-alone mode until I select a 414A livery that incorporates the GTN 750 and then the the stand-alone display disappears and the TDS software shows TDS GTNXi is in guage mode.  The GTN 750 does not show in the VC.  I have reinstalled and searched for a solution but I have missed it.  Hopefully you can help me out.  Thank you.
Bill

Hello Bill,

Do not worry, we will help you get this problem sorted. The first and most important question is: do you have installed multiple versions of MSFS, as in one purchased from Steam and the other from the Windows Store? When you first started the TDS GTNXi, did you get a message box pop-up asking you which version of MSFS to use?

Thank you for the fast response.  The installation did ask which version of MSFS2020 that I had installed.  I never could actually get the Steam version to install and I gave up and installed the MS Store version.  MSFS2020 still shows up in my Steam library as uninstalled and lists no local files.  I suppose that there is a registry entry that needs to be removed.
Bill

(03-29-2022, 06:57 PM)admin Wrote:

(03-29-2022, 05:37 PM)olddogg Wrote:

(03-29-2022, 10:32 AM)admin Wrote:

(03-29-2022, 03:37 AM)olddogg Wrote: I can not get the display for the TDS GTNXi to display in the VC.  The TDS GTNXi operates in stand-alone mode until I select a 414A livery that incorporates the GTN 750 and then the the stand-alone display disappears and the TDS software shows TDS GTNXi is in guage mode.  The GTN 750 does not show in the VC.  I have reinstalled and searched for a solution but I have missed it.  Hopefully you can help me out.  Thank you.
Bill

Hello Bill,

Do not worry, we will help you get this problem sorted. The first and most important question is: do you have installed multiple versions of MSFS, as in one purchased from Steam and the other from the Windows Store? When you first started the TDS GTNXi, did you get a message box pop-up asking you which version of MSFS to use?

Thank you for the fast response.  The installation did ask which version of MSFS2020 that I had installed.  I never could actually get the Steam version to install and I gave up and installed the MS Store version.  MSFS2020 still shows up in my Steam library as uninstalled and lists no local files.  I suppose that there is a registry entry that needs to be removed.
Bill

Hello Bill,

This is a very recent bug that was discovered by us int he TDS GTNXi with the version selection, we have since fixed it and it will be included in the next version of the TDS GTNXi. In the meantime, can you please send us an email at support@tdssim.com and we will send you a test version which should solve your problem. Thank you.

(03-30-2022, 02:43 AM)olddogg Wrote:

(03-29-2022, 06:57 PM)admin Wrote:

(03-29-2022, 05:37 PM)olddogg Wrote:

(03-29-2022, 10:32 AM)admin Wrote:

(03-29-2022, 03:37 AM)olddogg Wrote: I can not get the display for the TDS GTNXi to display in the VC.  The TDS GTNXi operates in stand-alone mode until I select a 414A livery that incorporates the GTN 750 and then the the stand-alone display disappears and the TDS software shows TDS GTNXi is in guage mode.  The GTN 750 does not show in the VC.  I have reinstalled and searched for a solution but I have missed it.  Hopefully you can help me out.  Thank you.
Bill

Hello Bill,

Do not worry, we will help you get this problem sorted. The first and most important question is: do you have installed multiple versions of MSFS, as in one purchased from Steam and the other from the Windows Store? When you first started the TDS GTNXi, did you get a message box pop-up asking you which version of MSFS to use?

Thank you for the fast response.  The installation did ask which version of MSFS2020 that I had installed.  I never could actually get the Steam version to install and I gave up and installed the MS Store version.  MSFS2020 still shows up in my Steam library as uninstalled and lists no local files.  I suppose that there is a registry entry that needs to be removed.
Bill

Hello Bill,

This is a very recent bug that was discovered by us int he TDS GTNXi with the version selection, we have since fixed it and it will be included in the next version of the TDS GTNXi. In the meantime, can you please send us an email at support@tdssim.com and we will send you a test version which should solve your problem. Thank you.

Email sent.  Thank you.
Bill