+- TDS Sim Software Forums (http://www.forum.tdssim.com)
+-- Forum: TDS Sim Software (http://www.forum.tdssim.com/forum-1.html)
+--- Forum: TDS GTNXi Flight Simulator (http://www.forum.tdssim.com/forum-2.html)
+--- Thread: Garmin trainer not detected, except that it is - trap for new users from P3D/XPlane (/thread-175.html)
Garmin trainer not detected, except that it is - trap for new users from P3D/XPlane - Chairman - 02-28-2022
I guarantee I'm not the first one to be stung with this one
I have the RXP GTN installed for P3D which is also based off of the Garmin trainer, and I was very pleased to see when I installed the TDS GTN that it picked up that install of the trainer so the install only took 30 seconds and I didn't end up with 2 trainers taking up drive space.
Nice, right up until I launched MSFS and up came an error about the GTN NXi trainer not being installed, please reinstall via the manager.
Several minutes of searching later I found that the manager is the installer, like most people in these days of decent broadband I just open installers without saving them so I didn't have it, easily solved, and it said the latest version of the Garmin trainer was definitely there.
Cue headscratching, then I had the idea to see if the NXi worked in the Garmin trainer and voila - the RXP unit needs the base Garmin GTN trainer and that is what the manager checks for, the TDS unit needs the GTN NXi add-on within the garmin trainer which isn't installed by default and the manager doesn't check for it. Once I sussed that out a single click on an 'install' button inside the trainer added that NXi trainer and we're over that hurdle.
Not the first, won't be the last, leaving this here for the next person that needs it
RE: Garmin trainer not detected, except that it is - trap for new users coming from P3D - Crunchmeister - 02-28-2022
Open the trainer and make sure you have the GTNXi installed from its content manager. RXP uses the GTN, not the GTNXi. If you only have the GTN, then the TDS GTNXi won't work.
RE: Garmin trainer not detected, except that it is - trap for new users coming from P3D - Chairman - 02-28-2022
(02-28-2022, 11:03 PM)Crunchmeister Wrote: Open the trainer and make sure you have the GTNXi installed from its content manager. RXP uses the GTN, not the GTNXi. If you only have the GTN, then the TDS GTNXi won't work.
Yes, that's exactly what I just said.
RE: Garmin trainer not detected, except that it is - trap for new users coming from P3D - Crunchmeister - 03-01-2022
Yeah, my bad. I should have read the rest of your post more clearly.
RE: Garmin trainer not detected, except that it is - trap for new users coming from P3D - adminOwner2 - 03-01-2022
Chairman,
Thank you for posting the information, hopefully it will help our users!
RE: Garmin trainer not detected, except that it is - trap for new users coming from P3D - Noksi - 03-02-2022
It's not only if you come from P3D, the RXP GTN for X-Plane is missing the GTN NXi add-on as well. Same software so of course X-Planes versoin of the RXP GTN is missing it as well.
RE: Garmin trainer not detected, except that it is - trap for new users from P3D/XPlane - sloppysmusic - 11-09-2024
My garmin trainer says it IS installed. Still getting same error. Was working fine before latest update 1.08. I also use RXP in P3d
RE: Garmin trainer not detected, except that it is - trap for new users from P3D/XPlane - adminOwner2 - 11-10-2024
(11-09-2024, 11:45 PM)sloppysmusic Wrote: My garmin trainer says it IS installed. Still getting same error. Was working fine before latest update 1.08. I also use RXP in P3d
Hello,
There is no need to post the same question in many places, it makes it difficult for us to offer support. We have responded with the solution to your original post.